Upcoming events

Follow Us

Log in

Day Sailer Association
For racing, for cruising, for having fun!

Log in

A bit of background on the DS design...

<< All album photos 4/5 photos
North American Championship Regatta
Photo © 2014 Deb Mason-McCaffrey. Used with permission.

In the mid-1950s George O'Day contacted Uffa Fox regarding a concept for a boat. George was the US agent for Fairey Marine boats and thought particularly highly of the Swordfish. With plans flying back and forth across the Atlantic, agreement was eventually reached on the design, except for O'Day's addition of a cuddy of which Uffa did not approve.

The result was a boat of length overall 16'9", a beam of 6' 3", sail area (main and jib) 145 square feet and spinnaker 96 square feet. The pivoting centreboard gives a draft with board up of 7" and 3' 9" board down. During the design development the cuddy was added in the deck moulding. The result was the Daysailer.

From 1957-1977 the O'Day Company built first the Day Sailer 1, and then the Day Sailer 2. With six builders since 1977, the deck mould has gone through changes, but in all that time, and roughly six thousand Day Sailers later, the original, classic, Uffa Fox planing hull has remained unchanged and intact.

With fleets throughout the continental United States and Brazil, the Day Sailer Association is experiencing new growth. The objectives of the Day Sailer Association are simple: to support one-design racing, to retain an emphasis on family racing and cruising and to promote the sort of sailing.  

Powered by Wild Apricot Membership Software